8"x2" High Impact Polymer Nylon Rigid Caster - 110NX08228R

About This Caster - 110NX08228R

Build this 8-inch nylon rigid into the back corners of an impact-prone cart that travels long over debris near chemicals, where a smaller wheel drags and a steel wheel rusts in the wash-down.

The 8-inch diameter is the largest nylon wheel here and rolls over cords, spill, and joints with the least effort, holding a loaded cart's momentum down a long run, and the rigid frame tracks dead straight under a tow. The high-impact nylon wheel resists chipping and shrugs off chemicals from -30 to 220°F, and Albion's 110 Contender brings its heat-treated, kingpinless build to the rigid corners. The precision ball bearing rolls the load smoothly. Confirm the rig clears an 8-inch wheel.

Ideal applications

• Long towed runs over debris near chemicals, finished or not
• Back corners holding momentum on the largest nylon wheel
• Wash-down routes to 220°F where steel would rust

For the steering corners of the same cart, the swivel 110NX08228S pivots and follows.

Pairs with: 110NX08228S swivels on the front corners so the cart steers up front and tracks at the rear.

Wrong fit? Need heat past 220°F, or a smaller wheel? See the ductile iron 110FR08201R and the 4-inch nylon rigid 110NX04228R.

Also in this family: the 5-inch nylon rigid 110NX05228R, or the full kingpinless caster collection.