2.5" Polyolefin 2 Series Swivel Caster - 2.02254.55 MTG13 BRK1

About This Caster - 2.02254.55 MTG13 BRK1

Specify this 2.5-inch polyolefin swivel with the top lock brake and 5/8-11 stem for the parking corner of a busy bottling cart on a heavier-tapped leg, the no-rust caster that anchors deep, rolls smooth, and locks the wheel on a wet floor.

The 5/8-11 stud anchors a heavier 5/8-tapped frame, the molded polyolefin wheel resists the bottling-floor wash, the ball bearing carries the busy duty, and the top lock brake stops the wheel so the loaded cart holds at a fill station. At 2.5 inches it keeps a low deck. It is the no-rust braked corner for a heavier wet-plant cart on a 5/8-tapped leg.

Ideal applications

• Parking corner of a bottling cart on a 5/8-11 frame, wet floor
• No-rust loaded rig locked at a fill or cap station
• Sturdy busy cart that holds still under a load

Skip the brake on corners that only roll and steer; the plain 5/8-11 MTG13 ball polyolefin 31GB25X58-03 turns freely at a lower cost.

Pairs with: the plain 5/8-11 MTG13 ball polyolefin 31GB25X58-03 on the rolling corners.

Wrong fit? No brake, smaller thread, or fine thread? See the plain MTG13 31GB25X58-03 and the braked fine 5/8-18 MTG14 ball 31GB25X581802-03.

Also in this family: the braked fine 5/8-18 MTG14 ball 31GB25X581802-03 and braked 3/4-10 MTG15 ball 31GB25XH3402-03, or the 2 Series caster collection.