4" Polyolefin 2 Series Swivel Caster - 2.04256.55

About This Caster - 2.04256.55

Bolt this 4-inch polyolefin swivel with the ball bearing and top plate to a busy wash-down cart that gets loaded and moved often, the ball bearing that rolls the weight easy and the Black polyolefin wheel that washdown will not break down.

The ball bearing carries a heavier load and rolls it with less push than a Delrin bore, so a loaded wash cart starts with less effort, polyolefin resists water and mild chemicals where rubber would swell, the plate bolts to a flat frame, and the bigger 4-inch wheel clears thresholds. It is a hard economical wheel, so it rolls freely but cushions less than rubber. Confirm your bolt pattern matches the 3-5/8 by 2-1/2 inch plate before you order. It is the easy-rolling big-wheel polyolefin swivel for a busy wet-area cart.

Ideal applications

• Busy wash-down cart loaded and moved often
• Damp area where a hard wheel resists water and chemicals
• Loaded cart that starts with less push on a ball bearing

Loads are light and infrequent? The Delrin polyolefin version costs less and rolls fine at low duty.

Pairs with: the polyolefin ball rigid 31GB40G-03 on the trailing corners.

Wrong fit? Need a brake or a softer wheel? See the top-lock polyolefin ball plate swivel 31GB40V02-03 and the rubber ball plate swivel 31MB40V02-03.

Also in this family: the polyolefin Delrin plate swivel 31GH40V-03, or the 2 Series caster collection.