8"X2" Stainless Steel Top Plate Rigid Caster with Glass Filled Nylon Wheel - D4.08108.839 SS WB29

About This Caster - D4.08108.839 SS WB29

Reach for this 8-inch Defender D4 rigid when a budget cart carries heavier loads, clears the biggest obstacles, and is pushed slowly.

The roller bearing carries the most weight of the three bearings at a slow pace, and the tallest 8-inch wheel bridges the widest cracks and clears big obstacles with the least effort. The economical polyolefin tread resists chemicals and moisture without absorbing water and wipes clean, on a stainless steel frame for corrosion. Polyolefin is a value tread that tops out below a poly-on-core wheel and, being hard, can mark a soft floor. Rigid means it tracks straight at the rear. It serves from -45 to 180°F, the cost-minded choice when loads run heavier but slow on bad floors.

Ideal applications

• Budget 8-inch carts carrying heavier loads over the worst floors
• Stainless sanitary rigs in corrosive, sprayed-down bays
• Rear corners under slower, heavier pushing on rough ground

Confirm the roller-bearing and polyolefin load classes, that the floor suits a hard wheel, and the 9-1/2-inch mount height before ordering.

Pairs with: the 8-inch polyolefin precision-ball rigid D4.08108.835 on faster lead corners.

Wrong fit? Need a floor-friendly higher-load wheel? See the 8-inch HI-TECH polyurethane roller rigid D4.08108.929 in the Colson collection.

Also in this family: the 8-inch HD glass-filled nylon roller rigid D4.08108.839 DT, or the full Colson collection.