6" x 2" High Impact Polymer Wheel w/ Ball Bearing - 41TC62-02

About This Wheel - 41TC62-02

Specify this 6-inch Trionix high-impact polymer wheel for a loaded cart that has to cross floor seams without a hard shove, the diameter that clears obstacles paired with a bearing that keeps the push light.

A 6-inch wheel is the size where carts start crossing dock lips and expansion joints, and the question becomes how much effort it takes to roll a load over them. Trionix high-impact polymer rides over those obstacles on a precision ball bearing that holds down the rolling resistance, so a loaded cart crosses seams with a light push instead of a heave, and the tough polymer takes the impact of dropping off each edge. It serves from -30°F to 200°F. The ride is firm and non-marking.

Ideal applications

• Loaded cart crossing dock lips and joints with a light push
• Ergonomic transport over seams reducing operator effort
• Warm or cold service to 200°F under repeated edge impact

Skip this 2-inch tread for the heaviest loads; the 8-inch by 3-inch 50TC83-02 carries more on a wider tread.

Pairs with: a matching 6-inch by 2-inch caster fork to build a swivel or rigid caster, from the Caster Hardware collection.

Wrong fit? More load, or a taller wheel? See the 8x3 inch 50TC83-02 and the 8-inch 41TC82-02.

Also in this family: the 5-inch 41TC52-02 and 8-inch 41TC82-02, or the high-impact polymer wheel collection.