E-line Rigid 4"x2" Polyurethane (TPU) USA-Made Wheel 4"x4.5" Plate Caster With Tread Lock Brake; Part# ER4X2TUMDTBK
Delivery: Estimated delivery time: 2-3 days
Returns: 30 Days Returns
Volume discounts are available for bulk or frequent orders
Available Configurations
Product Specifications
More Information About This Product
About This Caster - ER4X2TUMDTBK
Set this 4-inch E-line rigid on the braked back corner of a low non-marking wash cart on a wet slope, the TPU polyurethane caster whose firm maroon tread carries the load while a greaseless Delrin bore rides out the damp and a tread lock holds the rear.
A TPR rubber wheel flat-spots under a heavy load; the Pemco TUM polyurethane tread on a polypropylene core carries the higher E-line load without setting and stays non-marking, the Delrin bearing has no grease to wash out and no race to corrode, and the tread lock clamps the rear wheel so the cart cannot drift on a wet slope. The 4-inch diameter keeps the rear low, and the 4 by 4-1/2 top plate bolts to a flat deck. USA-made for fast shipping.
Ideal applications
- Braked back corners of low wash carts on a wet slope
- Greaseless rear that holds against drift, non-marking
- Loads that flat-spot a rubber tread in a wash area
Skip the polyurethane wheel if the cart works near heat over 180°F or on oily floors; a phenolic E-line wheel survives oil and heat to 250°F where TUM softens.
Pairs with: the plain ER4X2TUMD Delrin rigid on the rolling corners.
Wrong fit? Want a precision or roller bore? See the ER4X2TUMBTBK precision tread lock and the ER4X2TUMTBK roller tread lock.
Also in this family: the ER5X2TUM 5-inch rigid, or the full Pemco collection.
View Datasheet and CAD Model
Need Help with Your Caster Order?
Visit the resources linked below including everything you need to get you started!
