8"x 2- 1/2" Rigid Caster with Phenolic Wheel, Albion 62 Series - 62TM08407R

About This Caster - 62TM08407R

Set this wide 8-inch 62 Series rigid under the heaviest oven or die cart, the phenolic caster whose 2-1/2 inch tread spreads a hard-wheel load and holds up to 250°F.

The extra half inch of tread width spreads a heavy load across more phenolic, so the wide 8-inch wheel carries more than the standard 2-inch tread without digging in, and it rolls easy under that load. The hard resin runs from -65°F to 250°F and shrugs off oil and solvent. The roller bearing carries the weight, and the plate bolts flat on a 10-1/8 mount. The hard tread marks soft floors and rides stiff.

Ideal applications

• Heaviest oven and die carts on a wide tread
• 2-1/2 inch phenolic spreading a hard-wheel load
• Heat-stable resin to 250°F under heavy weight

Skip the phenolic wheel on a finished floor or under heavy impact; it marks and can crack on a sharp hit, so a polyurethane 62PD08201R rolls non-marking and a cast iron 62CA08201R takes the shock.

Pairs with: the 8-inch phenolic 62TM08201S swivel on the steer end.

Wrong fit? Finished floor or impact? See the polyurethane 62PD08201R and the cast iron 62CA08201R.

Also in this family: the 10-inch wide phenolic 62TM10407R, or the full Albion caster collection.