160mm x 50mm Blickle Polyurethane Caster Wheel - ALTH 160/20K

About This Wheel - ALTH 160/20K

Fit this 160mm wheel where an equipment cart has to cross thresholds, expansion joints, and the odd bit of floor debris, the routes where a smaller wheel drops into every gap and stalls the cart against each lip.

The larger diameter climbs over breaks a 125mm or 150mm wheel hangs up on, and the Blickle Extrathane polyurethane tread at 92 Shore A holds its shape under load so the wheel does not bog down once it is rolling. The die-cast aluminium centre carries the load without flexing and stays rust-free for indoor service.

Ideal applications

• Equipment carts crossing thresholds and dock-to-floor transitions, mixed surface
• Transport trolleys on jointed or lightly broken concrete, multi-shift
• Carts that stall on smaller wheels at every floor lip, finished floor

Skip the 160mm if deck height is tight and the floor is smooth; a 125mm ALTH wheel keeps the deck lower where there are no thresholds to climb.

Pairs with: a 20mm axle and the matching swivel or rigid fork for a 160mm wheel.

Wrong fit? Smooth floor, low deck? See the 125mm ALTH; rough or noisy routes, see EasyRoll rubber in the Blickle collection.

Also in this family: ALTH 150, ALTH 200, or the full Blickle collection.