2.5" Polyolefin 2 Series Swivel Caster - 2.02256.55 MTG35 BRK1

About This Caster - 2.02256.55 MTG35 BRK1

Specify this 2.5-inch polyolefin swivel with the ball bearing and top lock brake on the square 3-1/2 by 3-1/2 inch plate for the parking corner of a busy wet cart on a square frame, the no-rust caster that matches a square mount, rolls smooth, and locks the wheel still.

The square 3-1/2 by 3-1/2 inch plate fits a square-drilled frame and seats in any orientation, the molded polyolefin wheel resists the wash, the ball bearing carries the busy duty, and the top lock brake stops the wheel so the cart holds on a wet floor. At 2.5 inches it keeps a low deck. It is the no-rust braked square-plate corner for a busy wet cart.

Ideal applications

• Parking corner of a busy square-frame wet cart, brine or wash floor
• No-rust symmetric braked mount that holds in any orientation
• Square-plate high-traffic cart that holds still without rusting

Skip the brake on corners that only roll and steer; the plain square MTG35 ball polyolefin 31GB25V-03 turns freely at a lower cost.

Pairs with: the plain square MTG35 ball polyolefin 31GB25V-03 on the rolling corners.

Wrong fit? No brake, rectangular pattern, or a load tread? See the braked MTG27 ball polyolefin 33GB25V02-03 and the square MTG35 Delrin braked polyolefin 31GH25V02-03.

Also in this family: the braked MTG27 ball polyolefin 33GB25V02-03 and braked MTG59 ball polyolefin 32GB25V02-03, or the 2 Series caster collection.