3" Polyolefin 2 Series Swivel Caster - 2.03354.52 MTG53

About This Caster - 2.03354.52 MTG53

Choose this 3-inch polyolefin swivel with the sleeve bearing and long 1/2-13 stem for a wash-down cart on a thick tapped boss, the inch-and-a-half thread that reaches deep and the pressed-in sleeve bushing that runs smoother and longer than a bare plain bore.

The 1/2-13 thread runs a full inch and a half, so it reaches through a thick boss for a deep, solid hold, the sleeve bearing is a pressed-in bushing that turns smoother and wears longer than a plain bore under steady use, polyolefin rinses clean where rubber would swell, and the 3-inch wheel keeps the deck low. Confirm your boss is 1/2-13 UNC and deep before you order. It is the long-stem sleeve-bearing polyolefin swivel for a wash-down cart on a thick boss.

Ideal applications

• Wash-down cart on a thick 1/2-13 boss that needs deep reach
• Sleeve bushing that wears longer than a plain bore
• Steady-use cart where a hard wheel resists water

Boss is thin, or you want a brake? The short or one-inch stem seats in a shallow boss and a brake holds the cart.

Pairs with: the braked polyolefin sleeve long-stem swivel 2.03354.52 MTG53 BRK1 on the corners that park.

Wrong fit? Need a short stem or a Delrin bearing? See the braked polyolefin short-stem swivel 2.03354.52 MTG10 BRK1 and the polyolefin fine-thread Delrin swivel 2.03354.52 MTG14.

Also in this family: the polyurethane sleeve long-stem swivel 2.03354.92 MTG53, or the 2 Series caster collection.