3" Polyolefin 2 Series Swivel Caster - 2.03354.52 MTG53 BRK1

About This Caster - 2.03354.52 MTG53 BRK1

Specify this 3-inch polyolefin swivel with the sleeve bearing, top lock brake, and long 1/2-13 stem for a wash-down cart on a thick tapped boss that parks at a sink, the inch-and-a-half thread that reaches deep and the brake that pins the wheel where you set it.

The 1/2-13 thread reaches a full inch and a half through a thick boss for a deep hold, the sleeve bearing is a pressed-in bushing that turns smoother and wears longer than a plain bore, the top lock brake stops the wheel at a wet station, and polyolefin rinses clean where rubber would swell. Confirm your boss is 1/2-13 UNC and deep before you order. It is the long-stem braked sleeve-bearing polyolefin swivel for a wash-down cart on a thick boss.

Ideal applications

• Wash-down cart on a thick 1/2-13 boss that holds at a sink
• Deep inch-and-a-half thread that seats in a thick mount
• Sleeve bushing that locks at a wet station and wears long

Boss is thin, or you want no brake? The short stem or the plain long-stem version fits a different mount.

Pairs with: the plain polyolefin sleeve long-stem swivel 2.03354.52 MTG53 on the rolling corners.

Wrong fit? Need a Delrin bearing or a fine thread? See the braked polyolefin short-stem Delrin swivel 2.03354.52 MTG10 BRK1 and the polyolefin fine-thread Delrin swivel 2.03354.52 MTG14.

Also in this family: the polyurethane sleeve long-stem swivel 2.03354.92 MTG53, or the 2 Series caster collection.