8"X2" Stainless Steel Top Plate Rigid Caster with Polyolefin Wheel - D4.08108.831 SS

About This Caster - D4.08108.831 SS

Pick this 8-inch Defender D4 rigid when a wash-down cart has to ride over the roughest floors with the least effort and the load is modest.

At 8 inches this is the tallest wheel in the line, bridging the widest cracks and clearing the biggest obstacles so the operator pushes with far less effort than a smaller wheel. The polyolefin tread is an economical hard plastic that resists chemicals and moisture without absorbing water, and the Delrin plain bearing runs grease-free and corrosion-proof for sprayed-down bays. The stainless steel frame handles corrosion. Polyolefin is a value tread that carries less than a poly-on-core wheel and, being hard, can mark a soft floor. Rigid means it tracks straight at the rear. It serves from -45 to 180°F.

Ideal applications

• Tall 8-inch carts crossing the roughest wash-down floors
• Economical stainless rigs needing maximum obstacle clearance
• Grease-free rear corners on broken or uneven concrete

Keep the load in the polyolefin class, confirm your frame accepts the 8-inch wheel, and check the 9-1/2-inch mount height before ordering.

Pairs with: a matching Defender D4 swivel up front so the cart steers while this rigid tracks straight, from the Colson collection.

Wrong fit? Need higher capacity at this height? See the 8-inch glass-filled nylon Delrin rigid D4.08108.531 in the Colson collection.

Also in this family: the 6-inch polyolefin Delrin rigid D4.06108.831, or the full Colson collection.