A-line 4" x 1.25" Polyolefin (POD) Wheel Caster With Swivel Top Plate and Side Locking Brake - Part# AS40P2PODSB

About This Caster - AS40P2PODSB

Use this 4-inch A-line swivel on a flat frame that needs a wide bolt pattern and a corner that parks locked on a sloped or busy floor.

It bolts down through a 3-1/8 by 4-1/8 inch top plate, wider than the standard A-line plate, so the four bolts sit farther apart and spread the mounting load across more of the frame. A side brake adds a lever that presses a shoe on the wheel to stop it rolling while the swivel stays free, and the hard polyolefin wheel on a polypropylene core resists moisture from -45 to 180°F. The Delrin plain bearing runs maintenance-free.

Ideal applications

• Wide 3-1/8 by 4-1/8 inch plate frames that park on a grade
• Flexing decks where a wide bolt pattern spreads the load
• Hard polyolefin wheels held by a side brake, swivel free

If the corner only rolls, the plain large-plate AS40P2POD drops the brake.

Pairs with: plain large-plate A-line swivels on the rolling corners, these braked units diagonally opposite.

Wrong fit? Need a non-marking wheel or the standard plate? See the grey TPU large-plate side-brake AS40P2TPUSB and the smaller-plate side-brake AS40P1PODSB.

Also in this family: the grey TPU large-plate AS40P2TPU, or the full Pemco collection.