A-line 5" x 1.25" Polyolefin (POD) Wheel Caster With Threaded Stem - Part# AS50T2POD

About This Caster - AS50T2POD

Thread this 5-inch A-Line swivel into a thicker leg or a double-nutted frame when the wheel has to take wash-down and chemicals.

The 1/2-13 stem is a half-inch longer than the standard A-Line stem at an inch and a half, so it reaches through a thicker frame member or carries a lock nut on each side for a stem that will not back out under vibration. The wheel is tough black polyolefin that ignores water, cleaners, and mild acids, on a Delrin bearing that needs no grease and cannot rust. The A-Line is rated to 350 pounds per caster from -45 to 180°F.

Ideal applications

• Thicker legs and double-nutted frames needing more thread
• Long 1-1/2-inch stem that resists backing out under vibration
• Wash-down and chemical racks where polyolefin won't swell

For the shorter stem on a thinner frame, the 1-inch threaded AS50T1POD seats in less depth.

Pairs with: four long-stem A-Line casters, or two plain plus two braked AS50T2PODSB.

Wrong fit? Need a brake or a shorter stem? See the side-brake AS50T2PODSB and the short-stem AS50T1POD.

Also in this family: the TPU long-stem AS50T2TPU, or the full Pemco collection.