6" x 2" Polyolefin Wheel w/ Delrin Bearing - 41GH62-01

About This Wheel - 41GH62-01

Choose this 6-inch wide polyolefin wheel with the Delrin bearing for a wet plant cart that crosses floor seams and gets hosed down, the tall wheel that rides over the gaps without a bearing to grease.

A 6-inch diameter is what bridges the expansion joints, drain channels, and dock seams on a wet plant route, and the Delrin plain bearing means no grease to wash out when the cart gets hosed. The molded polyolefin neither rusts nor soaks up the standing water and chemicals that destroy a metal-cored or rubber wheel, so the cart keeps rolling clean through a wash-down bay all shift. The wide 2-inch tread carries a steady load over the rough wet floor. The ride is firm and non-marking.

Ideal applications

• Wet plant cart crossing drain channels and floor seams, hosed
• Wash-down transport over expansion joints in a process bay
• Tall wet-area rig where greased bearings flush out

Skip the Delrin polyolefin if the load is heavy enough to flat-spot it or wants cushioning; a 6-inch HI-TECH polyurethane wheel carries more and rolls softer.

Pairs with: a matching 6-inch by 2-inch caster fork to build a swivel or rigid caster, from the Caster Hardware collection.

Wrong fit? Heavier load, or cushioning? See the 6-inch HI-TECH 41JC62-03 and the 6-inch glass-filled nylon 41XH62-03.

Also in this family: the 4-inch delrin 41GH42-01 and 5-inch delrin 41GH52-01, or the polyolefin wheel collection.