100mm x 37mm Blickle Synthetic Caster - PO 100/8KA-ELS

About This Wheel - PO 100/8KA-ELS

Specify this 100mm conductive nylon wheel for an ESD or electronics cart on an 8mm axle that needs a light push and static control.

The ELS grade makes the nylon electrically conductive, so a rolling static charge drains through the wheel to a grounded floor rather than into a sensitive load, and the 8mm ball bearing keeps the push light, where the plain-bore conductive version drags more. The hard nylon 6 at 70 Shore D carries a high load and rolls with very low resistance on a smooth floor, with a synthetic thread guard on the race. The grey wheel is non-marking, the trade being a hard ride. It holds from -4 to 176°F.

Ideal applications

• 100mm ESD carts on an 8mm axle wanting a light push
• Conductive nylon with a ball bearing draining static to ground
• Non-marking grey wheel near sensitive electronics

For a plain-bore conductive version on a thicker 15mm shaft, the PO 100/15G-ELS takes the bigger axle.

Pairs with: a grounded conductive fork and an 8mm axle in an ESD-controlled area.

Wrong fit? Don't need static control or want a thicker shaft? See the standard 8mm ball PO 100/8KA and the conductive 15mm plain PO 100/15G-ELS.

Also in this family: the 125mm conductive PO 125/15G-ELS, or the full Blickle collection.