4" Performa Rubber 2 Series Rigid Caster - 2.04208.441

About This Caster - 2.04208.441

Bolt this 4-inch Performa rubber rigid caster with the Delrin bearing and top plate to the back corners of a cart that tracks straight, the fixed yoke that holds the line and the bigger 4-inch soft Grey wheel that rolls over obstacles a smaller wheel would stub on.

A rigid caster does not swivel, so it keeps the cart tracking straight while swivels up front steer, the 4-inch wheel clears thresholds, cords, and floor seams better than a 3-inch wheel, the Performa rubber tread cushions the load and leaves no mark, and the Delrin bearing rolls dry with nothing to grease. Confirm your plate pattern matches the 3-5/8 by 2-11/16 inch plate before you order. It is the straight-tracking rubber rigid for the back corners of a cart that rolls over obstacles.

Ideal applications

• Back corners of a four-caster cart that should track straight
• Bigger 4-inch wheel that clears thresholds and cords
• Quiet route where a soft Grey tread and Delrin run hushed

Need an easier roll under load or a swivel corner? A ball bearing rolls easier and a swivel steers the cart.

Pairs with: the rubber modular swivel 31MH40X88-03 on the leading corners.

Wrong fit? Want a ball bearing or a tougher wheel? See the rubber ball rigid 31MB40G-03 and the polyurethane Delrin rigid 31JH40G-03.

Also in this family: the polyolefin Delrin rigid 31GH40G-03, or the 2 Series caster collection.