5"X2" Stainless Steel Top Plate Rigid Caster with Glass Filled Nylon Wheel - D4.05108.539 SS WB29

About This Caster - D4.05108.539 SS WB29

Go with this 5-inch Defender D4 rigid when a chemical-area cart is loaded to its limit and pushed slowly.

This is the highest-capacity 5-inch Maxim build: the roller bearing carries the most weight of the three bearings, suited to slow, sustained pushing, and the glass-fiber-reinforced Maxim wheel matches it while resisting chemicals and moisture. At 5 inches it crosses thresholds more easily than a smaller wheel, on a stainless steel frame for corrosive, sprayed-down bays. Glass-filled nylon is hard with no cushioning and can mark a soft surface, so this is a pure strength-and-capacity caster for hard floors. Rigid means it tracks straight at the rear. It serves from -20 to 180°F.

Ideal applications

• Maximum-load 5-inch chemical-area carts pushed slowly
• Stainless transfer rigs at the top of the nylon capacity range
• Straight-tracking rear corners under the heaviest sustained loads

Confirm the roller-bearing load class, the hard-nylon floor fit, and the 6-1/2-inch mount height before ordering.

Pairs with: the 5-inch Maxim precision-ball rigid D4.05108.535 on faster lead corners.

Wrong fit? Lighter or grease-free duty? See the 5-inch Maxim Delrin rigid D4.05108.531 in the Colson collection.

Also in this family: the 6-inch Maxim roller rigid D4.06108.539, or the full Colson collection.