A-line 3" x 1.25" Thermo-Urethane (TPU) Wheel Caster With Threaded Stem - Part# AS30T1TPU

About This Caster - AS30T1TPU

Put this 3-inch swivel under a light display fixture or equipment leg with a shallow threaded boss, where a short stem seats fully and the wheel leaves no marks.

The Pemco A-Line TPU wheel is thermo-urethane on a cast iron core, a grey non-marking tread that carries the 350-lb load class on an iron center that stays round under load. The short 1/2-13 by 1 inch threaded stem screws into a shallow boss or locknut where a longer stem would bottom out, and the precision ball bearing keeps the swivel rolling under a light push. The tread holds to 180°F, and at 1-1/4 inches wide it stays tucked under a slim fixture leg.

Ideal applications

• Display fixtures and equipment legs with a shallow boss
• Short threaded stem seating fully in a thin frame
• Non-marking grey TPU tread on a finished floor

Skip the urethane near heat over 180°F or on oily floors; a POD threaded AS30T1POD shrugs off wash-down where the tread softens.

Pairs with: the side-brake AS30T1TPUSB when the fixture has to hold.

Wrong fit? Wash-down or a tighter budget? See the POD threaded AS30T1POD and the Pemco collection.

Also in this family: the longer-stem AS30T2TPU, or the full Pemco collection.