A-line 3.5" x 1.25" Thermo-Urethane (TPU) Wheel Caster With Threaded Stem - Part# AS35T2TPU

About This Caster - AS35T2TPU

Put this 3.5-inch swivel under an equipment stand with a deep threaded boss, where a longer stem grabs more thread, a taller wheel clears thresholds, and the tread leaves no marks.

The grey TPU tread is thermo-urethane on a cast iron core, Pemco's non-marking A-Line wheel that carries the 350-lb load class on the iron center. The longer 1/2-13 by 1-1/2 inch threaded stem grabs more thread in a deep boss or a stacked locknut than the short stem, so it holds firmer on a frame drilled deep, the taller 3.5-inch wheel clears small thresholds, and the precision ball bearing keeps the swivel rolling under a light push. The tread holds to 180°F.

Ideal applications

• Equipment stands with a deep threaded boss
• Longer stem grabbing more thread on a deep frame
• Taller 3.5-inch non-marking wheel over a stand threshold

Past 180°F or on an oily floor, pass on the urethane; a POD threaded AS35T2POD keeps rolling through wash-down.

Pairs with: the side-brake AS35T2TPUSB when the stand has to hold.

Wrong fit? Wash-down or a tighter budget? See the POD threaded AS35T2POD and the Pemco collection.

Also in this family: the grip-ring AS35G1TPU, or the full Pemco collection.