A-line 5" x 1.25" Polyolefin (POD) Wheel Caster With Hollow Kingpin - Part# AS50H1POD

About This Caster - AS50H1POD

Use this 5-inch A-Line swivel where the frame mounts a caster through a single center hole and the wheel has to take wash-down and chemicals.

The hollow kingpin bolts the whole caster to the equipment with one 1/2-inch bolt through the swivel center, so it fits a frame that has no room for a four-bolt plate and swaps out in seconds with a single nut. The wheel is tough black polyolefin that ignores water, cleaners, and mild acids, riding on a Delrin bearing that never needs grease and cannot rust. The A-Line is rated to 350 pounds per caster from -45 to 180°F.

Ideal applications

• Frames mounting a caster through one 1/2-inch center bolt
• Tight angle-iron carts with no room for a bolt plate
• Wash-down lines where a polyolefin wheel won't absorb water

For a non-marking wheel that rolls easier on a finished floor, the TPU hollow-kingpin AS50H1TPU swaps in thermo-urethane.

Pairs with: four hollow-kingpin A-Line casters, or two plain plus two braked AS50H1PODSB.

Wrong fit? Need a brake or a stem mount? See the side-brake AS50H1PODSB and the grip-ring AS50G1POD.

Also in this family: the top-plate AS50P1POD, or the full Pemco collection.