A-line 5" x 1.25" Polyolefin (POD) Wheel Caster With Grip Ring Stem - Part# AS50G1POD
Delivery: Estimated delivery time: 2-3 days
Returns: 30 Days Returns
Volume discounts are available for bulk or frequent orders
Available Configurations
Product Specifications
More Information About This Product
About This Caster - AS50G1POD
Reach for this 5-inch A-Line swivel when the equipment uses a round stem socket and the wheel has to shrug off water and chemicals.
The grip ring stem is a 7/16-inch round shaft with a sprung ring that snaps into a matching socket, so the caster pushes in by hand and holds without a nut, the standard mount on scaffolds, floor machines, and tube-socket carts. The polyolefin wheel is a tough black polypropylene that will not absorb wash-down water, cleaners, or mild acids, and it rides on a Delrin bearing that needs no grease and cannot rust. The A-Line is rated to 350 pounds per caster and runs from -45 to 180°F.
Ideal applications
- Stem-socket scaffolds and floor machines taking a 7/16 grip ring
- Wash-down and chemical areas where a polyolefin wheel won't swell
- Maintenance-free Delrin bearing on a corrosion-prone line
For a non-marking wheel that rolls easier on a finished floor, the TPU grip-ring AS50G1TPU swaps the polyolefin for thermo-urethane.
Pairs with: four grip-ring A-Line casters, or two plain plus two braked AS50G1PODSB for a parked corner.
Wrong fit? Need a brake or a bolt mount? See the side-brake AS50G1PODSB and the hollow-kingpin AS50H1POD.
Also in this family: the top-plate AS50P1POD, or the full Pemco collection.
View Datasheet and CAD Model
Need Help with Your Caster Order?
Visit the resources linked below including everything you need to get you started!
