A-line 5" x 1.25" Polyolefin (POD) Wheel Caster With Swivel Top Plate - Part# AS50P2POD

About This Caster - AS50P2POD

Bolt this 5-inch A-Line swivel to a frame drilled for the wider plate when the wheel has to take wash-down and chemicals.

The 3-1/8 by 4-1/8-inch top plate is the larger A-Line bolt pattern, spreading the four bolts wider than the standard plate to match a bigger frame or an existing wider hole layout, which spreads the load over more of the deck. The wheel is tough black polyolefin that ignores water, cleaners, and mild acids, on a Delrin bearing that needs no grease and cannot rust. The A-Line is rated to 350 pounds per caster from -45 to 180°F.

Ideal applications

• Frames drilled for the wider 3-1/8 by 4-1/8 bolt pattern
• Bigger decks spreading the load over a wider plate
• Wider-plate wash-down decks where polyolefin won't absorb water

If the frame uses the standard narrower plate, the smaller-plate AS50P1POD matches that bolt pattern.

Pairs with: four large-plate A-Line casters, or two plain plus two braked AS50P2PODSB.

Wrong fit? Need a brake or the narrower plate? See the side-brake AS50P2PODSB and the smaller-plate AS50P1POD.

Also in this family: the hollow-kingpin AS50H1POD, or the full Pemco collection.