4" Polyurethane Rigid Caster - ER4X2MOP

About This Caster - ER4X2MOP

Set this 4-inch rigid on the back corners of a low loaded cart that has to track straight, where the deck rides low and the wheel has to carry weight without marking a finished floor.

The wheel molds a polyurethane tread onto a cast iron core from Pemco: the iron carries the load without the flex a plastic core shows, while the red poly tread keeps the roll non-marking and quiet on a finished floor. At 4 inches the wheel keeps the deck low, the rigid fork holds the line so the cart tracks straight, and the roller bearing carries the weight. The 4 by 4-1/2 inch top plate bolts to a flat deck, and the tread holds to 180°F.

Ideal applications

• Back corners of low loaded carts that track straight
• Cast iron core carrying weight without plastic-core flex
• Non-marking red poly tread on a finished floor

On a finished floor where weight matters more than capacity, a lighter TUM poly-on-plastic caster at a lower rating is easier to push than this iron core. See the Pemco collection.

Pairs with: the 4-inch swivel ES4X2MOP on the front corners of a four-corner cart.

Wrong fit? Moderate load or need a brake? See the braked ER4X2MOPTBK and the Pemco collection.

Also in this family: the 5-inch rigid ER5X2MOP, or the full Pemco collection.